Publications
of Department of Mechanical Engineering
- International Journal
- ·
- 2024
Integration of RCCI and CDF Combustion in Conventional Diesel Engine Using CNG-diesel Fuels: An Experimental Study
Author : , J Chhatbar, PARAG RAJPARA, Srijit Biswas, Rahul Banerjee
- International Conference
- ·
- 2024
Experimental Investigation on Performance and Emission of CNG-Diesel Dual Fuel Engine
Author : , Chhatbar, J., PARAG RAJPARA, Banerjee, R.
- International Conference
- ·
- 2023
Integration of Hydrogen with LPG in Domestic Burner: An Experimental Study
Author : , Pillai, S.K., PARAG RAJPARA, Subramonia, P.M. and Balusamy, S.
- International Conference
- ·
- 2020
Improvement in combustion and emission characteristics of methane fuelled upward swirl Can combustor with hydrogen enrichment
Author : PARAG RAJPARA, Shah, R. and Banerjee, J.
- Research Paper
- ·
- 2020
Development of Flywheel-Based Regenerative Braking System
Author :
- Research Paper
- ·
- 2019
Biodiesel Production from Waste Cooking Oils by Transesterification Process Using Alkaline Catalysts
Author : Prof. Sagar Sureshbhai Kanjiya, Prof. Darshit Shantilal Dadhaniya, Co-Author - Prof. Bhavinkumar Jentilal Vegada
- International Journal
- ·
- 2019
Biodiesel production from waste cooking oils by transesterification process using alkaline catalysts
Author : Prof. Sagar Sureshbhai Kanjiya, Prof. Darshit Shantilal Dadhaniya, Co-Author - Prof. Bhavinkumar Jentilal Vegada, Dr. Ashvin J Makadia and Dr. Rupesh L Patel
- International Conference
- ·
- 2018
Effect of dilution air distribution on performance of upward swirl can combustor
Author : PARAG RAJPARA, Shah, R. and Banerjee, J.
- International Conference
- ·
- 2014
Analysis of Surface Roughness in Turning with Coated Carbide Cutting Tools: Prediction Model and Cutting Conditions Optimization
Author : Dr. Ashvin Jaysukhbhai Makadia, Dr. J. I. Nanavati
- International Journal
- ·
- 2013
Experimental Characterization of a Sintered Copper Powder Heat Pipe
Author : Prof. Bhavinkumar Jentilal Vegada, Mr. Satish B. Sharma, Mr. Chirag P. Devan, Mr. Vikas J Lakhera
- International Conference
- ·
- 2013
Surface roughness prediction in turning of AISI 410 steel with RSM
Author : Dr. Ashvin Jaysukhbhai Makadia, Dr. J. I. Nanavati
- International Conference
- ·
- 2013
Optimization of tool geometry and cutting parameters for turning operations based on Response Surface Methodology
Author : Dr. Ashvin Jaysukhbhai Makadia, Dr. J. I. Nanavati
- International Conference
- ·
- 2013
Optimizing Surface Finish in Turning Operation by Factorial Design of Experiments
Author : Dr. Ashvin Jaysukhbhai Makadia, Dr. J. I. Nanavati
- International Journal
- ·
- 2013
Optimisation of machining parameters for turning operations based on response surface methodology
Author : Dr. Ashvin Jaysukhbhai Makadia, Dr. J. I. Nanavati
- International Conference
- ·
- 2010
Design and Analysis of Fixture for Heavy Shell Tilting
Author : Prof. Vimal Gunvantbhai Limbasiya, Dr. K. M. Patel, Mr. Chintan Mehta
- Research Paper
- ·
Experimental Investigation of Solar Assisted Adsorption Refrigeration System Using Silica Gel-Water
Author : , Prof. Mukesh Vallabhbhai Vekariya
- International Journal
- ·
Evaluation of tensile strength for PLA/Cu composite part produced by Material Extrusion 3D Printing
Author :
- Mechanical Engineering
- arrow_forward About Department
- arrow_forward Programs Offered
- arrow_forward Faculty
- arrow_forward Laboratories
- arrow_forward Industrial Consultancy (MCC)
- arrow_forward CAD Club
- arrow_forward Publications
- arrow_forward News & Activities
- arrow_forward Placement
- arrow_forward Major Recruiters
Who we are?
Darshan University - having the foundation of its first Institution laid in 2009, and later on, established and consolidated under Gujarat Private Universities (Second Amendment) Act of 2021. It is one of the leading institutes within Saurashtra that offers Diploma, UG, PG and Doctoral Courses.
For Students / Parents
For Others
Connect with a counsellor
1